|
Print Method:
HDP Dye-Sublimation / Resin Thermal Transfer
Resolution:
300 dpi (11.8 dots/mm)
Colours:
Up to 16.7 million / 256 shades per pixel
Print Ribbon Options:
Full-color, YMC*, 700 prints
Full-color with resin black, YMCK*, 500 prints
Full-color with two resin black panels, YMCKK*, 400 prints
Full-color with resin black and heat seal panel for difficult-to-print surfaces,
YMCKH*, 400 prints
All HDP ribbons utilize Fargo’s exclusive RibbonTraq™ system for maximum print
quality, performance, reliability and ease of use.
HDP Film Options:
Clear (1,250 prints)
Standard Holographic
Custom Holographic, special order
Overlaminate Options:
Thermal Transfer Overlaminate, .25 mil thick
PolyGuard Overlaminate, 1.0 mil and .6 mil thick
All overlaminates available in clear, holographic globe design or custom holographic design. PolyGuard available in a CR-80 patch size.
Print Speed:
44 seconds per card / 82 cards per hour (YMC with transfer)*
54 seconds per card / 66 cards per hour (YMCK with transfer)*
79 seconds per card / 45 cards per hour (YMCKK with transfer)*
55 seconds per card / 65 cards per hour (YMCK/lamination)*
80 seconds per card / 45 cards per hour (YMCKK/lamination)*
Accepted Standard Card Sizes:
CR-80
(3.375“L x 2.125“W / 85.6mmL x 54mmW)
Print Area:
Over-the-edge on CR-80 cards
Accepted Card Thickness:
Print only: .030“ (30 mil) to .070“ (70 mil) / .762mm to 1.778mm
Print/Lamination:
.030“ (30 mil) to .040“ (40 mil) / .762mm to 1.02mm
Accepted Card Types:
ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards
Input Hopper Card Capacity:
200 cards (.030“ / .762mm)
Output Hopper Card Capacity:
100 cards (.030“ / .762mm)
Memory:
8MB RAM
Display:
User-friendly, SmartScreen LCD Control Panel; LED Display on Card Lamination Module
Software Drivers:
Windows® 2000/XP
Encoding Options:
ISO Magnetic Stripe Encoding Module, dual high- and low-coercivity, Tracks 1, 2, and 3 JIS II Magnetic Stripe Encoding Module
E-Card Docking Station (required for all e-card options or 3rd party smart card encoding)
Contactless Smart Card Encoder (HID iCLASS and MIFARE)
Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards
Prox Card Encoder (HID read-only)
Operating Temperature:
65° to 80° F / 18° to 27° C
Humidity:
20-80% non-condensing
Dimensions:
Printer:
10.75“H x 22.5“W x 13“D / 275mmH x 570mmW x 330mmD
Printer + Lam:
10.75“H x 35“W x 13“D / 275mmH x 890mmW x 330mmD
Lam Module:
10“H x 12.5“W x 10.25“D / 255mmH x 318mmW x 260mmD
Weight:
HDP600:
39 lbs. / 17.7 kg
HDP600 + Lam:
58 lbs. / 26.4 kg
Lam Module:
19 lbs. / 8.7 kg
Safety:
UL 60950, CSA C2.2 No. 60950, CB report (EN 60950), CE mark
Emissions:
FCC Part15 Class B, EN 55022: 1998 Class B, CRC c1374, ITS EMC mark,
EN 61000-3-2: 2000, EN 61000-3-2: 1995, EN 55024: 1998, CE mark
Supply Voltage:
100-240 VAC, 4.25A
Supply Frequency:
50 Hz / 60 Hz
System Requirements:
Microsoft® Windows 2000 or XP
Pentium® class 233MHz
64MB + RAM
200MB +free hard disk space
Open USB port
Interface:
USB 1.1 (Optional Centronics Parallel, IEEE 1284 compliant)
Warranty:
Printer
One Year Warranty, all parts and labour included.
Options:
Choose one or a combination of any of the following:
- 32MB RAM Upgrade
- Kit Card Lamination Module
- Printer Cleaning
- Kit Card Encoding Module
- External Print Server (Windows only; required for stand-alone networking of
printer/encoders)
- ISO Magnetic Stripe Encoding Module, dual high- and low-coercivity, Tracks 1, 2,
and 3
- JIS II Magnetic Stripe Encoding Module
- E-Card Docking Station (required for all e-card options or 3rd party smart card
encoding)
- Contactless Smart Card Encoder (HID iCLASS and MIFARE)
- Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4
memory and microprocessor smart cards (T=0, T=1) as well as synchronous
cards
- Prox Card Reader
| 
